How to maintain your safety shoes?

Cleaning and safety shoes

The men's safety shoes and women's safety shoes are individual work equipment. Safety shoes can take several forms: safety rangers, safety trainers. They are designed to protect the worker's feet against the risk of slipping, sprains, or even back pain. It is therefore important to maintain them properly to ensure their efficiency and longevity. In order not to compromise quality, you have to do the right things and use products adapted to the material of your shoes.

Remember, safety shoes must be complemented by work clothes: Work pants, work overalls, or by more specific workwear such as high visibility clothing .

Good gestures to know

The life of your shoes depends on maintenance

There is no secret. The long life of the safety shoe begins with simple gestures. It must be taken care of after each working day. To do this, be sure to remove any gravel or metal parts that have become embedded in the sole.

How to protect shoes from moisture?

If the shoe is damp, dry it quickly at room temperature, i.e. 20�C, in a dry place without heat. Do not forget to wax them after use, especially if they are made of leather. Putting paper rolled into a ball inside keeps them flexible. And if you have the possibility, always make sure to alternate between two shoes.

How to clean the outside of work shoes according to the materials?

It is important to know that a safety shoe can be made of leather, nubuck, textile or synthetic fibres. The type of maintenance and cleaning products differ according to its materials.

Leather safety shoes

It can be different types of leather: full grain, verpelle, hydropelle, split leather, smooth or suede leather.

• For smooth leather: You can clean it with a damp cloth or sponge. Scrub stems and surface dirt. It must then be waterproofed with a product designed for this purpose. Finish by moisturizing with a moisturizer or cleansing milk. This nourishes the leather and keeps its shine.
• For suede leather: Start by brushing the shoes with a soft bristle brush. Then apply a thin layer of waterproofing spray before wearing them. Repeat this operation every month.
• For split leather: it is advisable to use a soft brush to remove dust before waterproofing. Also, shoe polish should be avoided.

In any case, it is essential to dry the shoes in a warm room while keeping a good distance of 2 meters from a radiator and any heat source so that the leather does not deform or become damaged. 'abyss.

Work shoes in split suede or nubuck

The crust of velvet is very fragile and requires special care. For cleaning, start by brushing the still dry safety shoe with a piece of natural crepe. With stubborn stains, use a sheet of brass or a sheet of fine sandpaper. To make it easier, you can wash it with slightly soapy water. It must be rinsed thoroughly to avoid any traces. For drying, it should be left in the open air.

Cloth shoes

The textile of the shoe can be cleaned with a damp cloth (mistaken in lukewarm water). Then take a brush and pour a small dose of dishwashing liquid and baking soda into it, scrub. For rinsing, use a sponge. You can let it air dry, away from the sun.

Safety shoes in breathable canvas, synthetic canvas or microfiber

For synthetic canvas work shoes, the use of soapy water is recommended. Almost any product will do, because it is not a fragile material.

For microfiber work shoes, consider the look and components of the upper. They can be smooth, suede or nubuck. In this case, proceed in the same way as leather shoes.

To dry, take the same precautions as other materials by drying them in the ambient air.

How to clean the inside of safety shoes?

Taking care of the inside of your pair of shoes is just as important as the outside. You have to take care of it, because your comfort depends on it. For good hygiene, it is important to spray the soles daily with spray. This neutralizes the development of bacteria and eliminates or limits the appearance of parasitic fungi. In addition, bad odors will be eliminated. Other effective cleaning methods, spray deodorant on the soles each time you come home from work.

For anti-perforation soles, stones or debris that could be lodged in them must be regularly removed. This way you reduce the premature degradation of your protective footwear.

In addition, the insoles of the shoe should be changed when they show signs of wear. This is essential to gain comfort.

In summary, the cleaning stage should not be neglected, not only for a question of hygiene, but also to ensure a long life of the safety shoes and optimal protection of the feet.

How to waterproof safety shoes?

Faced with rain, the only solution that will make your shoes last over time is waterproofing, so we recommend that you waterproof your shoes with a product suitable for the fabrics of the shoe. -this. Here are some tips for waterproofing your safety shoes:

• Waterproof from the moment of purchase, even before the first use
• Remove any dirt before each waterproofing
• Hold the spray 20/30 cm from the shoe
• Prefer outdoor shoe waterproofing for odors
• Allow shoes to dry completely before wearing