Lemaitre Skate S3 CI SRC low safety shoes 100% non-metallic

• Polycarbonate shell resistant to 200 joules
• Electrical Resistance-Antistatic Footwear
• Energy absorption through the heel
• Resistance of the outsole to hydrocarbons
• Resistance of the sole to perforation
• Insulating sole against the cold
• Resistance of the upper to water penetration and absorption
• SRC anti-slip soles
• 100% non-metallic footwear

Features:

• Injected polycarbonate toe cap: imperceptible when worn because it is ultra-light and ergonomic, chemically inert, elastic (if crushed, the toe cap recovers its shape, easily releasing the foot), non-magnetic (not detectable by safety gates) safety) and thermal insulation (insensitive to variations and heat transfers between -10°C and +40°C).
• Anti-perforation insert: zero penetration” in high tenacity textile: ultra light, ultra flexible (insensitive to wear), thermally insulating (insensitive to temperature transfers), and which protects 100% of the surface of the foot.
• ADRENALINE sole:

New design

Non-slip thanks to a "pneumatic" structure for better evacuation of liquids

Double density polyurethane (PU/PU or PU2D) injected

Front and rear PU sole reinforcements on the upper for protection and improved durability

Heel strike, for a natural roll of the foot during walking and great comfort when driving

Unhooked heel for improved safety, especially on ladders

• Parabolic® sole:

Non-slip thanks to the concave structure of the sole which flattens under the weight of the body, which improves grip on the ground because the surface in contact is greater.

Dynamic thanks to a spring effect of the sole which restores energy when the foot lifts off the ground.

Anti-fatigue thanks to the combination of cushioning and dynamism effects during the rolling of the foot (during walking or static phase).

• Weight per pair size 42: 1250 g

Material:

• Velvet-finish split leather
• Collar: water-repellent and water-repellent 3D textile
• Lining: three-dimensional honeycomb textile

Protection:

• Toe cap: large polycarbonate (200 joules)
• Anti-perforation insert: high tenacity "zero" penetration composite textile (1100 Newtons)

Standards:

• EN ISO 20345: 2011 S3 SRC
• Ci: insulating insoles against the cold

Additional information:

The EN 345 ​​protective shells and toe caps withstand an energy of 200 Joules. This energy corresponds to a 20 kg object falling from a height of one meter. On crushing (fall height equal to 0), the 200J protective shell resists a force equivalent to 1,500 kg.