Agricultural work boots and shoes

Agricultural jobs always involve difficult or restrictive working conditions. Professionals in this sector must protect themselves by wearing personal protective equipment such as boots and work shoes.

Wearing safety shoes has become mandatory for the various tasks on the farm.

Why wear agricultural shoes and boots?

Many farmers use boots for different reasons.

Prevent back pain: back pain comes mainly from the feet. Therefore, choose padded soles that support the hollow of the foot.

Avoid cold feet: having cold feet leads to blood circulation problems as well as chilblains on the feet. Farm workers must wear heat-insulated agricultural boots.

Avoid the risk of slipping: working on farms is not without risks, before buying new work boots, check if the anti-slip has been tested by a certified body.

How to choose your agricultural shoes and boots?

Considerations include comfort, flexibility, grip, durability, design, and chemical resistance.

What material are agricultural shoes and boots made of?

Firstly, the selection criteria mentioned above depend entirely on the material used.

PVC - Polyvinyl chloride has good acid resistance, but this material is not a very good thermal insulator.

The rubber boots are often more expensive because they are made by hand. However, the thermal insulation is not optimal despite its flexibility.

Polyurethane foam: this material provides good thermal insulation, but the boots are not flexible enough.

What are the security criteria to be respected?

Secondly, the choice of a pair of safety shoes is defined according to the risks to which its user is exposed.

The ISO 20345 standard

The safety criteria are indeed set by the ISO 20345 standard. It makes it possible to distinguish safety shoes according to their advantages so that they can best meet your requirements.

Additional standards:

• B: is the fundamental property of safety shoes. It justifies the presence of a shock-resistant tip of 200 joules. This element can be made of aluminum or steel.

• A: indicates the antistatic nature of a pair of shoes, which prevents the accumulation of static electricity. On the other hand, the boots evacuate it towards the ground.
• FO: defines the resistance of footwear to hydrocarbons. In contact with these substances, a certified FO sole undergoes less deformation compared to a conventional sole.
• E: shows the energy absorption performance at the heel.
• WRU and WR: attest to the ability to resist water penetration. A pair of WRU shoes provides protection on its upper while a WR model helps slow water intrusion.
• P: indicates the resistance of footwear to the risk of penetration by metallic or non-metallic objects.

Sliding standards

A pair of safety shoes must also have a second property. The latter determines the grip capacity on certain types of ground. Two categories are distinguished:

SRA: The shoes hold on the ceramics and withstand an inclination of up to 7° under the pressure of a force of 500 N. They are also resistant to slipping, to contact with detergent products from soapy type.

SRB: This time, the pair of shoes is grippy on steel floors (which may be covered with oily material).

SRC: SRA +SRB

Other standards to be aware of

Safety shoes can also benefit from other specific protection standards.

AN: a pair of AN-certified shoes provides additional protection for the malleolus.

M: a pair of shoes under the M standard provides additional protection for the metatarsals.

CI: designates thermal insulation against the cold.

HI: this standard offers thermal insulation against continuous heat.

HRO: shoes with HRO standards are resistant to heat contact on the outsole up to 300°.

CR: indicates the cut resistance.

Models of agricultural boots and shoes

As a professional in the agricultural sector, you have to choose your work shoes and boots carefully. Also, there are several models like riser, waterproof, etc.

TREK BROWN S3 CI SRC safety shoes

They are S3 all-terrain standard and 100% non-metallic. The pair of TREK BRUN safety shoes is available with men's and women's footwear. They provide complete protection for your feet.

S3 Vertix SRC Lined Boots

They have a steel shell resistant to 200 joules. The S3 Vertix SRC lined pair of boots is also comfortable and durable.

Piemontite leather lined safety boots S3 CI SRC

Made of leather, they insulate against the cold thanks to their insulated insulated lining. They also have a non-slip sole that resists slipping on steel floors.

Rigair safety non-lined safety boots S5 CI SRA

With a steel toe cap that withstands an energy of 200 joules, these safety boots also have a cold-insulating and non-slip sole.

DODGE SRC S3 high safety shoes

This is a pair of high shoes, S3 standard and made of leather. It is equipped with non-slip soles and equipped with a steel shell resistant to 200 jouless. Your feet will be completely protected.