How to waterproof work clothes?

How to make a garment waterproof?

There are several tips and natural products to make a clothing waterproof. You can use various waterproofing products for your coats and jackets. Beeswax can be effective, here's how to use:

• Heat a beeswax bar using a hair dryer;
• Rub your workwear from top to bottom or left to right;
• Also apply this waterproofing product to the seams;
• Put out to dry in the sun for a day.

Linseed oil is also effective for waterproofing workwear. Perform the following process:

• Apply the oil to the clothes using a brush;
• Spread it correctly so as to have a homogeneous product;
• Use a dry cloth to remove residue;
• Dry in the sun and air dry for 24 hours.

You can also protect your clothes with alum stone powder. The details of the procedure are as follows:

• Pour 250 g of powder into a saucepan;
• Heat the solution until the powder melts, then allow to cool;
• Apply the product to the clothes using a brush;
• Then air dry the garment.

Waterproofing or water repellency

You want to waterproof your clothes, be it jackets, coats or others. There are several alternatives to achieve this. A water repellent solution or another water repellent are the solutions to make your clothing waterproof.

Water repellency is defined as the runoff of water drops on the surface of the fabric without absorption. Water-repellent textiles are not really considered waterproof. They absorb water drops, but no longer protect you from moisture after a while.

Before spraying waterproofing products, be sure to thoroughly clean the surface to be treated. In fact, cleaning your jacket will remove the particles that clog the pores of the jacket's membrane.

Re-waterproofing

Do you want to re-waterproof your coat or jacket? There is a solution to re-enable it.

First of all, it is important to know the material of the jacket that needs to be re-waterproofed. You can do the water drop test for example. Simply pour the drops of water on the surface to be treated and check whether the fabric absorbs it or not.

To prevent the pores of the membrane from being clogged, drying is essential before using the once again waterproof garment. Over time, the jacket will absorb water which will clog the pores of the membrane. Drying helps prevent water absorption on the outer layer of the jacket.

To reactivate the waterproofness of your garment, simply wash your waterproof work garment machine wash at 30� or 40�C. Then let your professional clothing dry in a warm place. Avoid folding your coat when placing it in the washing machine.

How to make a waterproofing agent?

Fabric waterproofing

To make a good waterproofing agent, just mix silicone and white spirit. Then coat the clothes with this solution, the latter will soak the textile. Its application creates odors at the time of vaporization. However, this smell will disappear after a few days.

How to water-repellent fabric?

Gel glues such as ODICOAT can transform a fabric into a waterproof fabric. The product is also a UV and dirt repellent. Your fabrics will definitely resist water.

How to waterproof a coat?

Beeswax, linseed oil and alum stone powder can waterproof your coats. All you have to do is follow the different procedures mentioned above.

How to re-waterproof jackets?

Let the work clothes dry on a hanger for 24 hours after use. On the contrary, you will obtain the sauna effect, because the water vapors may no longer escape. To reactivate it, washing and drying are required to restore the initial performance of its waterproofing.