How to wash safety shoes?

Designed to protect the feet of workers against the risks associated with their sector of activity, safety shoes deserve regular maintenance. To avoid altering their level of protection, while improving their lifespan, you should remember to clean your construction shoes after each use. The cleaning technique and the suitable products vary according to their material of design. Find out how to wash your safety shoes easily and quickly.

What cleaning method for safety shoes?

The proper fit of safety shoes is essential for your comfort and safety at work. To avoid the risk of slipping and falling, they must be clean and well maintained. The cleaning method depends on the shoe design material:

Leather safety shoes

Using a brush or a damp cloth, you can get rid of stains that are embedded in your leather work shoes. Once clean, you can dry them in a dry place, at room temperature. Avoid the hot room at the risk of damaging and deforming the leather. To extend the life of your equipment, once dry, opt for a special leather polish identical to their color.

What grease for leather safety shoes?

Grease and shoe polish are complementary. While shoe polish nourishes and recolors the leather, grease provides better suppleness while deeply moisturizing. Thanks to the lubrication, your safety shoes will be protected from dryness, water and snow. Before polishing your shoes, consider dusting the surface. Using a chamoisine, apply the grease according to your expectations and repeat this process several times. Do not forget to massage the surface so that the product can penetrate deeply.

Suede leather safety shoes

Very fragile, suede or nubuck leather requires special care. To avoid damaging the shoes, brush them once dry using a piece of natural crepe. For the most stubborn stains, favor a thin sheet of sandpaper or a sheet of brass. Soapy water will also do the trick. Only you have to rinse them to avoid streaks.

Synthetic canvas safety shoes

For work shoes made from synthetic canvas, cleaning with soapy water is the easiest and most effective. Due to its resistance, you will have a wide choice of cleaning products. However, you must wait until the dirt is completely dry before removing it. As for drying, remember to air it out in the open air in a dry room, away from any source of heat.

How to clean the inside of safety shoes?

Both for the question of comfort and for hygiene, the interior maintenance of the women's safety shoes is more important than the outdoor one. For effective interior care, you can spray deodorant spray after each use of your work shoes. This product eliminates bad odors and provides freshness. Know that this gesture will have an antibacterial action. If you notice that the insole shows signs of wear, do not hesitate to replace it. Do not forget to check if your anti-perforation sole is in good condition. Remove all rubbish and stones to prevent your equipment from degrading.

How to deodorize safety shoes?

Wearing safety shoes is important for safety at work. However, these shoes can be reeked of sweat and dirt, which can be uncomfortable for the wearer and those around them. Here are some tips for deodorizing safety shoes. For shoe care:

• Make a baking soda paste: Mix baking soda with water to form a paste. Rub the paste into the shoes, let sit for 30 minutes, then brush.
• Use vinegar: soak a cloth in vinegar, then wipe the shoes. Let the vinegar dry on the shoes before wearing them.
• Sprinkle baby powder: After wearing safety shoes, sprinkle baby powder inside. The powder absorbs moisture and helps shoes smell fresh.

By following these tips, you can keep your safety shoes smelling fresh and clean.

How to clean shoes without damaging them?

When it comes to keeping your shoes clean, there are a few things to consider in order to prevent them from deteriorating. First of all, safety shoes should always be cleaned with a softer brush in order not to scratch the surface. Also, products containing chemicals such as bleach or alcohol should never be used on safety shoes, as they can damage the materials. Finally, always let the safety shoes air dry after cleaning them. Using a hair dryer or other heating element may damage the surface of the shoe. By following these simple tips, you can keep your safety shoes looking like new for longer.

Can safety shoes be machine washed?

The answer is yes for canvas safety shoes such as sneakers and safety sneakers. This material is particularly resistant to withstand machine washing. On the other hand, the pair of shoes made of imitation leather, leather or suede are vulnerable and should not be put in the washing machine. However, before rushing to wash construction shoes, remember to remove the laces and remove excess dirt with a sponge before putting them in the washing machine.